Installing the Avaya Ethernet Routing Switch
Figure 2: Package contents
1. Avaya Ethernet Routing Switch unit
2. Rack-mounting hardware that includes:
• Rack-mount brackets
• Screws to attach brackets to the switch
• Screws to attach the switch to the equipment rack
3. Rubber footpads
4. AC power cord
5. Standard 1.5 foot (45 cm) stacking cable
6. Documentation
Note:
Cable trays can be provided as an option.
Installing the switch on a table or shelf
You can install a single switch on any flat surface. The surface must support the combined weight of
the switch and attached cables (from 15 and 20 pounds [7 to 9 kilograms]).
To install a switch on a table or shelf, perform this procedure.
August 2016
Installing Avaya ERS 4800 Series
Comments on this document? infodev@avaya.com
10