Optimizing The Settings For Your Paper; Creating Paper Configurations - Epson Stylus Pro 7900 Manual

Note: Paper
configurations are needed
only for non-Epson media.
Note: You can also create
paper configurations using
the Epson LFP Remote
Panel installed from the
printer software CD.
Downloaded from ManualsPrinter.com Manuals

Optimizing the Settings for Your Paper

When you choose a media type in your Epson printer software, the driver
automatically determines the best settings for your paper. However, you may
want to fine-tune how the printer handles various media—especially if you
use non-Epson paper or a paper not supported by the driver. Use the paper
configuration settings described below.
You can create a special configuration, or group of settings, for each paper
type (up to ten types) and select the desired configuration whenever you
print on a particular stock.

Creating Paper Configurations

To create a configuration for a specific paper type, make sure the paper you
want to configure is loaded in the printer. Then follow these steps:
1. Press r , then press u or d to select
Menu
2. Press r, then press d to select
3. Press r, then press d or u to select a paper configuration number (1 to
10). Press r to save the number setting.
4. Press d or u to select
select a media type, then press r. Press
5. Press l twice to go back to the previous menu.
6. Press d or u to select
to select
NARROW, STANDARD, WIDE, or WIDER
setting is recommended for most paper types. Press
STANDARD
save the setting, then press l to go back to the previous menu.
7. Press d or u to select
to print the paper thickness pattern. A pattern similar to the following is
printed:
1 2 3 4
Smallest gap
83
Handling Paper and Other Media
CUSTOM PAPER
, then press r. Press d or u to
PAPER TYPE
OK
, then press r. Press the d button
PLATEN GAP
THICKNESS PATTERN,
5 6 7 8 9 10
.
PAPER SETUP
.
to save it.
. The
then press r. Press
11 12 13 14 15
| 83
to
OK
OK