190
|
Solving Problems
Note: If banding appears
on your print, leave the
paper guides in the
forward position.
Downloaded from ManualsPrinter.com Manuals
Fixing Paper Eject Problems
If the paper is curled too tightly to eject properly, make sure the paper guides
are attached to the printer. There are two paper guides for the Epson Stylus
Pro 7900 and five for the Pro 9900.
Attach the guides to the bottom of the printer as shown:
Epson Stylus Pro 7900
Do one of the following:
If you are feeding paper in front of the printer,
•
move the guides to the forward position.
If you are feeding paper backward (under the
•
printer), gently squeeze the paper guides and
push them to the backward position, as shown
below:
190
Epson Stylus Pro 9900