Equipment Key Change - GE Reason RT430 Technical Manual

GPS Grandmaster Clock
Figure 42: Section to update firmware, manipulate configurations, change key and change configuration username
To update the unit firmware, access the S
default browser and follow the steps below:
1. Click <S
directories. Enter the directory and the firmware update file name in the <F
will be sent to the unit. The update file has the extension .fw434
2. Click < S
3. After clicking <S
password, as shown in
cancel the action, click on <C
4. During the transmission, the unit will momentarily go out of operation.
5. After the change is completed, check the main page of the Web Interface. See more details
in Chapter 5
6.3

Equipment key change

It is possible to update the unit key in order to enable new features, according to the commercial policy. For
the unit key information, see
76
section of the Web Interface by typing the unit IP address in a
ETUP
> and it will allow the search of a new firmware update file in the windows
EARCH
> to send the new firmware to the unit.
END
>, a new window will open requesting username and configuration
END
Figure 43
ANCEL
Figure 43: Username and password window to update firmware
to ensure the correct operation of the unit and the updated firmware.
Chapter 1. Contact Alstom to acquire a new key to enable the desired features.
and password
. Enter username and password and click <L
>.
> field and it
ILE
>. To
OGIN
RT430-TM-EN-5