Remote Access (Interface Web); Monitoring Equipment Status - GE Reason RT430 Technical Manual

GPS Grandmaster Clock
5.2

Remote Access (Interface Web)

RT430 has a Web Interface that allows monitoring the unit status in real time and checking general system
information.
To connect to the Web Interface, enter the unit E
browser. For information about factory default for E
factory default settings, see
A start page containing the unit status information opens once you access the Web Interface. The remaining
monitoring and configuring sections are on a menu on the left. To access them, click the desired menu item.
The configuring sections are:

Status: monitoring the status of the unit in real time.

General Information: information of the unit system.
5.2.1

Monitoring equipment status

The section S of Web Interface, shown in
TATUS
real time.
70
Figure 38: Navigating the unit's local monitoring display
THERNET
Section 5.1.2 for instructions to obtain the current IP address.
Figure 39
port IP address into the address field of a web
port, see Chapter
THERNET
, allows monitoring status information of the unit in
3. If the unit is not using
RT430-TM-EN-5