Ethernet 1/2; Default Gateway - GE Reason RT430 Technical Manual

4.2.1

Ethernet 1/2

The E ports allow communication via TCP/IP or UDP/IP networks. For details on network interfaces,
THERNET
see Chapter 3.

MAC Address: informs the MAC address of the network port.

The IP Address field allows entering the IP address of the network port (only decimal numbers).

The Network Mask field allows entering the network mask from the network to which the unit will be
connected (only decimal numbers).

The Broadcast field allows entering the subnet address to which the unit will be connected (only
decimal numbers).
4.2.2

Default Gateway

Gateway configuration allows RT430 to communicate with other devices connected to a local subnet.

The IP Address field allows entering the network port IP address of the unit (only decimal numbers).

The field Port allows choosing the communication port to be used as gateway
RT430-TM-EN-5
Figure 26: Section to configure network parameters of the unit
RT430
51