Environment; Mounting; Connectors - GE Reason RT430 Technical Manual

GPS Grandmaster Clock
2.4

Environment

Temperature and relative humidity should not exceed the limits stated in
provide appropriate heating or cooling measures to ensure that these limits are respected at all times.
2.5

Mounting

RT430 has been designed to be mounted in a standard 19-inch rack using four M6x15 screws to affix. Allow
adequate clearance for all connections. In particular, the optical fiber cables should be installed respecting
the 30mm minimum bending.
For more information about the equipment dimensions, access
2.6

Connectors

Components and connectors of RT430's rear panel are shown in
TABLE 20: Connectores do painel posterior do equipamento.
Indicador
A
B 2 electrical outputs for synchronism with BNC connector, one of them insulated
C
D
30
Figure 5: Rear panel connectors
2 AC or DC inputs
2 electrical output for synchronism with TTL level screw connector, one of them
insulated;
2 open collector output;
L contactor relay;
OCKED
And 1 CMOS/TTL level even input.
1 modulated-amplitude output for IRIG-B124 signal
Chapter
Chapter 1.
.
Figure 5
Descrição
1. We recommend you to
RT430-TM-EN-5