Technical Specifications; Power Supply; Gps Antenna Input - GE Reason RT430 Technical Manual

The rear panel of the RT430 comprises two feeding inputs, AC or DC; two BNC connector electrical outputs
for synchronization, one of them insulated; two TTL level screw connector electrical outputs for
synchronization, one of them insulated; two open collector outputs; L
CMOS/TTL level input; one amplitude-modulated output for IRIG-B124 signal; two optical outputs; RS232
and RS422/485 serial ports; Ethernet network communication ports and GPS antenna input.
For information on installing the equipment, access
1.6

Technical Specifications

1.6.1

Power Supply

TABLE 3: Power supply specifications.
Operating nominal voltage
Operating voltage range
Frequency
Power Consumption
1.6.2

GPS Antenna Input

TABLE 4: GPS Antenna input specifications for temporal synchronizationl.
Signal
Sensibility
Sensibility
Number of channels
RT430-TM-EN-5
Figure 2: Rear view of the RT430
Chapter 2.
contactor relay and one
OCKED
100-250 V dc, 110- 240 V ac
80-275 V dc, 88-264 V ac
50/60 Hz ± 3Hz
MAX 20VA
Typical 12W
GPS L1 (1575.42 MHz), C/A code
152 dBm (After acquisition)
142 dBm (During acquisition)
12
RT430
21