Table of Contents
Advertisement
Troubleshooting
Empty the hole punch box
Try one or more of the following:
•
Empty the hole punch box.
•
Select Continue on the printer control panel to clear the message and continue printing.
•
Cancel the print job.
Error reading USB drive. Remove USB.
An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.
Error reading USB hub. Remove hub.
An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.
Imaging unit low [84.xy]
You may need to order an imaging unit. If necessary, select Continue on the printer control panel to clear the message
and continue printing. For non‑touch‑screen printer models, press
Imaging unit nearly low [84.xy]
If necessary, select Continue on the printer control panel to clear the message and continue printing. For
non‑touch‑screen printer models, press
Imaging unit very low, [x] estimated pages remain [84.xy]
You may need to replace the imaging unit very soon. For more information, see the "Replacing supplies" section of the
User's Guide.
If necessary, select Continue on the printer control panel to clear the message and continue printing. For
non‑touch‑screen printer models, press
Incompatible output bin [x] [59]
Try one or more of the following:
•
Remove the indicated bin.
•
From the printer control panel, touch Continue to clear the message and continue printing without using the
indicated bin.
to confirm.
to confirm.
to confirm.
238
Advertisement
Table of Contents
