Destination; How To Set Destination By Cursor Position - Furuno GP-39 Operator's Manual

5.

DESTINATION

Destination can be set four ways: by cursor, by waypoint, by route and by MOB posi-
tion. The previous destination is cancelled whenever a new destination is set. How to
set a MOB position is described in section 1.6. When setting a destination, a blue line
is shown between own ship and the destination selected. Also, the range and bearing
from own ship to the destination are shown at the left-hand side of the screen.
Range from own ship to the destination
5.1

How to Set Destination by Cursor Position

You can quickly set a destination called "Quick Point", i.e. "QP".
1. On the plotter display, operate the cursorpad to place the cursor on the location
desired for destination.
2. Press the GO TO key to enter the quick point.
The quick point is shown with a green solid circle, and named as "QP". This point
is saved in the waypoint list automatically.
3. Cancel the destination, referring to section 5.4, when you arrive at the waypoint.
Note: Each quick point set is erased when a new one is entered.
0.23
37
E 135 09.750
Bearing from own ship to the destination
Destination waypoint
Destination waypoint name
WP0001
E 135 10.000
Shortest course (blue)
N 34 08.500
N 34 08.375
5-1