How To Move Waypoints; How To Erase Waypoints; How To Erase A Waypoint On The Plotter Display; How To Erase A Waypoint Through The Waypoint List - Furuno GP-39 Operator's Manual

3. WAYPOINTS
3.4

How to Move Waypoints

You can move waypoints to any position on the plotter display.
1. Operate the cursorpad to place the cursor on the waypoint to move.
2. Press the ENT/CNTR key to show the pop-up window.
3. Select [Move], and press the ENT/CNTR key to show the waypoint information.
4. Operate the cursorpad to move the cursor to the new position.
5. Press the ENT/CNTR key.
3.5

How to Erase Waypoints

You can erase individual or all waypoint(s).
Note: You cannot individually erase the waypoint used as the current destination.
(See paragraphs paragraph 3.5.1, paragraph 3.5.2.)
3.5.1

How to erase a waypoint on the plotter display

1. Operate the cursorpad to place the cursor on the waypoint to erase.
2. Press the ENT/CNTR key to show the pop-up window.
3. Select [Delete], and press the ENT/CNTR key.
3.5.2

How to erase a waypoint through the waypoint list

1. Press the MENU key twice to show the main menu.
2. Select [Waypoints], and press the ENT/CNTR key.
3. Select [Alpha] or [Distance], and press the ENT/CNTR key.
4. Select the waypoint to erase, and press the ENT/CNTR key.
5. Select [Delete], and press the ENT/CNTR key.
6. Press the MENU key several times to close the menu.
3-6