1. OPERATIONAL OVERVIEW
1.5
Menu Overview
Most operations of your unit are done through the menu. Below is a quick introduction
on how to select a menu and change menu settings. If you get lost in operation, press
the MENU key to return to the main menu.
1. Press the MENU key once or twice to display the main menu.
Press once: Steering display, nav data display, satellite monitor display, user dis-
play 1 and user display 2.
Press twice: Plotter display, highway display.
Note: Following explanation takes the menus for the plotter display as an exam-
ple.
*: Shown only when the MENU key is pressed at the plotter display.
2. Press or to select an item, and press the ENT/CNTR key.
3. Press ENT/CNTR (or ) key.
For example, select [Plotter Setup] and press the ENT/CNTR key.
4. Press or to select option desired.
For example, select [COG/BRG ref.]
5. Press the ENT/CNTR key (or ).
A window appears showing the options for the selected item.
6. Press or to select option desired.
7. Press the ENT/CNTR key (or ).
8. Press the MENU key (or ) twice to close the menu.
1-8
*
Cursor