Furuno GP-39 Operator's Manual page 58

7. OTHER FUNCTIONS
2. Select the screen division, which is the number of data to display, and press the
ENT/CNTR key.
The display now looks something like the one shown below, showing data choices
and screen division selected.
* : Depending on the selection at step 2.
3. Select [A], [B], [C] or [D], and press the ENT/CNTR key.
4. Select data desired, and press the ENT/CNTR key.
5. Repeat steps 3 and 4 to set other data.
You can select digital data also from the User display 1 (display [6]) and 2 ([7]) directly.
1. Press the DISP key several times to show User display 1 or 2 desired, and press
the ENT/CNTR key to show the cursor.
Cursor (displayed approx. seven seconds)
Volts
Trip
100.0
7-8
ODO: Odometer distance
Trip: Trip distance
Time: Time
Date: Date
POSN: Position
Volts: Power voltage
SOG: Speed over ground
COG: Course over ground
RNG: Range
BRG: Bearing
(V)
23.9
(nm)
*
A
XTE: Cross-track error
TTG: Time to go
ETA: Estimated time to
WPT: Range and bearing
None: No display
SOG
15.8
COG
300
A A
B C
B
(to destination)
arrival (to destination)
to waypoint
(kn)
M( )