Connecting Network Cables
Procedure
Step 1
Remove the dust cap from any one of the available SFP ports on the router.
Step 2
Remove the protection cap from the SFP cable.
Step 3
Insert the SFP cable connector into the SFP port connector until the connector snaps into place. See call-outs
1 and 2 in the following figure.
Figure 41: ASR 901S Router Connected With SFP Cables
1
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
64
External IP65 SFP cable
7
Copper (Cu) port connector
Installing the Router
OL-29732-01