Cisco ASR 901S Series Installation Manual page 46

Mounting the Router onto a Pole
following figure) to provide maximum holding strength for extreme environments. Following the instructions
provided with the banding strap tool, loop each metal strap twice.
Figure 16: Metal Strap Open Space for 3.5 in. (8.9 cm) and Smaller Poles
1
Caution
Step 4 Position the pole clamp bracket on the pole as needed before tightening the metal bands.
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
36
Do not place the metal straps in the large open area between the pole clamp bracket and the pole
clamp gussets because this does not properly secure the router.
Metal strap open space
Installing the Router
OL-29732-01