Preparing To Install The Router; Safety Guidelines; Safety With Equipment - Cisco ASR 901S Series Installation Manual

Preparing to Install the Router

This chapter guides you through the process of preparing for your Cisco ASR 901S Series Aggregation
Services Router installation. It contains safety information and warnings, site preparation details and
instructions on unpacking the router. It contains the following sections:
•
•
•
•
•

Safety Guidelines

Before you begin installing the Cisco ASR 901S Aggregation Services Router, review the safety guidelines
provided in the
to avoid injuries or damaging the equipment.
For safety and compliance information, see
In addition, before replacing, configuring, or maintaining the router, review the safety warnings listed in the
document Cisco Regulatory Compliance and Safety Information for Cisco ASR 901S Series Aggregation
Services Router.

Safety with Equipment

To ensure your safety and protect the equipment, follow these guidelines. However, these guidelines may not
cover all potentially hazardous situations you may encounter during system installation, so be alert.
Before connecting the system to the power source, read the installation instructions. Statement 1004
Warning
• Before moving the system, always disconnect all the power cords and interface cables.
• Never assume that power is disconnected from a circuit; always check.
OL-29732-01
Safety Guidelines, page 15
Safety Warnings, page 17
Prerequisites, page 18
Site Planning , page 18
Unpacking the Router, page 20
Safety Precautions, on page 10
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
C H A P T E R
and General Safety Information for Mounting, on page 24
Table 11: Safety and Compliance, on page
2
86.
15