Table of Contents
Advertisement
8. Help
—————————————————————
REMOVE DOCUMENT
L The document is jammed. Remove the
jammed document (page 48).
—————————————————————
TRANSMIT ERROR
L A transmission error occurred. Try again.
—————————————————————
UNIT OVERHEATED
L The unit is too hot. Stop using the unit for a
while and let the unit cool down.
42
Frequently Asked Questions
8.3 When a function does
not work, check here
8.3.1 Initial settings
I cannot hear a dial tone.
L The telephone line cord is connected to the
[EXT] jack on the unit. Connect to the [LINE]
jack (page 13).
L If you used a splitter to connect the unit,
remove the splitter and connect the unit to the
wall jack directly. If the unit operates properly,
check the splitter.
L Disconnect the unit from the telephone line
and connect the line to a known working
telephone. If the working telephone operates
properly, contact our service personnel to
have the unit repaired. If the working
telephone does not operate properly, contact
your telephone company.
L The power cord or telephone line cord is not
connected. Check the connections.
L If you connected the fax machine through a
computer modem, connect the fax machine
directly to a telephone line jack.
I cannot make calls.
L The dialling mode setting may be wrong.
Change the setting (feature #13, page 35).
The unit does not ring.
L The ringer volume is turned OFF. Adjust it
(page 14).
8.3.2 General
The unit displays "CHECK PAPER" though the
paper is inserted.
L The paper is inserted halfway. Insert it
correctly (page 11) and press {START} to
clear the message.
The other party complains they only hear a
fax tone and cannot talk.
L FAX ONLY mode is set. Tell the other party
the number is only used for faxes.
L Change the receiving mode to TEL mode
(page 28).
The {REDIAL}/{PAUSE} button does not
function properly.
L If this button is pressed during dialling, a
pause will be inserted. If pressed
Advertisement
Table of Contents
