Table of Contents
Advertisement
2. Preparation
Volume
2.3 Adjusting volume
{SET}
{A}{B}
2.3.1 Ringer volume
4 levels (high/medium/low/off) are available.
While the unit is idle, press {A} or {B}.
L If any documents are in the document
entrance, you cannot adjust the volume.
Confirm that there are no documents in the
entrance.
To turn the ringer OFF
1. Press {B} repeatedly to display "RINGER
OFF= OK?".
2. Press {SET}.
L When a call is received, the unit will not ring
and will display "INCOMING CALL".
L To turn the ringer back ON, press {A}.
Ringer pattern
L You can select one of three ringer patterns
(feature #17, page 35).
2.3.2 Handset receiver volume
3 levels (high/middle/low) are available.
While using the handset, press {A} or {B}.
2.3.3 Monitor volume
8 levels (high to low) are available.
While using the monitor, press {A} or {B}.
14
Initial Programming
2.4 Date and time
You must set the date and time.
{SET}
{<}{>}
1
Press {MENU}.
2
Press {<} or {>} repeatedly to display the
following.
3
Press {SET}.
L Cursor (|) will appear on the display.
4
Enter the current month/day/year by
selecting 2 digits for each.
Example: August 10, 2004
Press {0}{8} {1}{0} {0}{4}.
5
Enter the current hour/minute by selecting 2
digits for each. Press {*} to select "AM" or
"PM".
Example: 3:15PM (12 hour clock entry
only)
1. Press {0}{3} {1}{5}.
2. Press {*} repeatedly to display "PM".
6
Press {SET}.
L The next feature will be displayed.
7
Press {MENU} to exit the program.
{MENU}
SYSTEM SETUP
PRESS NAVI.[( )]
SET DATE & TIME
PRESS SET
M:|
0 1/D:01/Y:04
TIME: 12:00AM
M:08/D:10/Y:04
TIME:
1 2:00AM
|
M:|
0 8/D:10/Y:04
TIME: 03:15AM
M:|
0 8/D:10/Y:04
TIME: 03:15PM
Advertisement
Table of Contents
