Assembling The Blower - Stihl BG 56 Instruction Manual

English
Check the fuel filler cap for leaks at
regular intervals.
Use only a spark plug of the type
approved by STIHL and make sure it is
in good condition – see "Specifications".
Inspect the ignition lead (insulation in
good condition, secure connection).
Check the condition of the muffler.
To reduce the risk of fire and damage to
hearing, do not operate your machine if
the muffler is damaged or missing.
Do not touch a hot muffler since burn
injury will result.
Vibration behavior is influenced by the
condition of the AV elements – check the
AV elements at regular intervals.
Shut off the engine before rectifying
problems.
8

Assembling the Blower

Mounting the Blower Tube
3
1
Line up the arrows (1).
N
Position the union nut so that the
N
symbol ‚ is in line with the arrows.
Push the blower tube (2) into the fan
N
housing stub (3) as far as stop.
Push the union nut (4) over the fan
N
housing stub as far as stop.
Rotate the union nut (4) in direction
N
of arrow until symbol ƒ is in line
with the arrows – union nut snaps
audibly into position.
BG 56, BG 56 C, BG 66, BG 66 C, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C
BG 56, BG 86, SH 56, SH 86
2
6
Push nozzle (5) onto blower
N
tube (2) as far as lug (6),
position (a) (long) or position (b)
(short), and rotate nozzle in
direction of arrow to lock in position.
BG 66
1
3
Line up the arrows (1).
N
Position the union nut so that the
N
symbol ‚ is in line with the arrows.
Push the blower tube (2) into the fan
N
housing stub (3) as far as stop.
5
a b