Gemini Sonar Application; Sonar Settings - Gemini 720i Product Manual

Seanet Pro Operation

7.2. Gemini Sonar Application

The Gemini Sonar display is very similar to the standard Sonar display used for Tritech
International Ltd mechanical sonar heads such as SeaKing and SeaPrince. However, the
Gemini Sonar has a fixed scan sector of 120° and unlike the mechanical heads does not
have option for scan sector size and position adjustments. Therefore these function controls
have been omitted from the settings bar.

7.2.1. Sonar Settings

The Gain, Contrast and Range controls relate to C1 – C3 respectively on a Remote Access
Terminal (RAT). Function buttons F1 & F2 will become active whenever a multi-device or
multi-window application is selected from the Applications menu. These controls will
cycle through and maximise the device windows.
Document: 0685-SOM-00001, Issue: 11
Note
Refer to the Seanet Pro Software Manual manual for a comprehensive
description of the menu bar, buttons, status bar and general features. This
section shows only those specific to the Gemini Sonar Application.
Note
If a Gemini Narrow Beam Imager is connected then the scan size will
automatically update to 130°.
58
Gemini Imaging Sonar
© Tritech International Ltd.