Record Button; Player Controls - Gemini 720i Product Manual

Gemini Software Operation
If the head is not able to connect due to being on a different network or having different
network settings the following will be displayed:

5.1.3. Record Button

The Log Directory selector controls which directory the data is recorded in. The directory
displayed in the Log Directory selector is the root directory where all recorded data will
be stored. Below that, a directory will be created using the current date, and each log data
filename will include the time when recording started.
The software has a maximum file size for the logged data files. Once this size has been
reached, the software will stop logging to the current file and open a new file to resume
logging. The name of the new file will be based on the time the file was opened. If data is
logged for a significant period of time, a number of files will be created, each with a different
filename indicating when the data was first logged to that file.
For example, if the Log Directory selector is showing that the directory selected is
C:\GeminiData, and recording was started at 4:30:02pm on 18th of October 2014, the
data would be recorded in the file 163002_IMG.ECD in the directory C:\GeminiData
\LD20141018.
The software will automatically create any directories needed for recording.

5.1.4. Player Controls

The player controls manage the replay of Gemini data previously recorded by the software.
Document: 0685-SOM-00001, Issue: 11
Note
To correctly set up the network refer to Appendix B, Setting the computer IP
address in Windows 7 (or Appendix A, Setting the computer IP address in
Windows XP) and Appendix C, Setting the Gemini Device IP Address in Gemini
Software.
The Record Button controls the recording of the image being displayed by
the software. When the button is clicked the software will start recording data
and the button will be highlighted. Recording can be stopped by clicking on
the button again.
28
Gemini Imaging Sonar
© Tritech International Ltd.