Advertisement
29. Plug the XM radio antenna connector into the XM
radio unit.
XM RADIO
ANTENNA CORD
(Fold excess length)
XM RADIO
BRACKET
30. Fold the excess length of the XM radio antenna
cable, and secure the cable with two wire tie with
clips. Attach the wire tie with clips into the holes
of the XM radio bracket.
8 of 9
WIRE TIE
WITH CLIP
XM RADIO
ANTENNA
CONNECTOR
XM RADIO
UNIT
4407061K
31. Using isopropyl alcohol on a shop towel, clean the
area where the EPT sealers will attach.
FUEL LID
OPENER CABLE
HALF OF EPT
SEALER
XM RADIO UNIT
32. Using scissors, cut the EPT sealer tape in half.
33. Wrap one half of the EPT sealer around the fuel lid
opener cable and one cushion tape on the tube at
the point where the cable and tube touches the
XM radio unit.
34. Attach the other half of the EPT sealer to the body
panel at the point where the drain tube touch the
body panel.
All 30528 (0509)
EPT SEALER
(Cut)
BODY
HALF OF EPT
PANEL
SEALER
© 2005 American Honda Motor Co., Inc. - All Rights Reserved.
DRAIN TUBE
CUSHION
TAPE
4407072K
Advertisement
