Data Replay : How To Replay Captured Data - GRAPHTEC GL840 Quick Start Manual

4. Data Replay : How to Replay Captured Data

When data capture ends, data is automatically replayed.
The automatically replayed data is the data captured to the SD memory card which
has been set as the data capture destination.
Press the [QUIT] key to end the data replay operation.
Explanation of basic operation in the GL840 is completed.
The GL840 has many other convenient functions. Please refer the next five pages for
details.
1. Selecting a file to replay
(1) Press the [REVIEW] key.
(2) Since the file you want to replay has the file name that was appended
automatically when the data was captured, move the cursor to the [OK]
button and then press the [ENTER] key.
(3) The Replay screen opens.
2. Replay screen
1.Scroll bar
5. Cursor
(1) Scroll bar : Displays the position within the whole data and the
(2) Level display area
: Displays the levels of A and B cursors and the
(3) Quick settings
: Use the
(4) Time display
: Displays the sampling interval and the time of the
(5) Cursor : Displays the cursor. (Note: Press the CURSOR key
Press the [QUIT] key to end the data replay operation.
A confirmation message is displayed. Press the [ENTER] key.
Data replay ends, and the GL840 goes into the Free Running status.
2. Level display area
3. Quick settings
display width.
difference between the A and B values.
keys to search the previous or next
level. (Note: Make search settings in the menu.)
cursor.
to switch between A and B cursors.)
Move the cursor using the
keys.
Desired level values and time can be checked by
moving the cursor.
4. Time display
keys or the
16