Page 1
Connevans.info Solutions to improve the quality of life This product may be purchased from Connevans Limited DeafEquipment.co.uk secure online store at www.DeafEquipment.co.uk...
Page 2
Streamer Instructions for Use Instructions for Use Ponto Ponto – The Bone anchored Hearing System – The Bone anchored Hearing System...
Thank you Thank you for choosing our product. To support your efforts, we have put great care and atten- tion into making sure that your new Ponto Streamer has high quality and is easy to use and maintain. Ponto Streamer is made specifically for the bone anchored sound processors Ponto Plus and Ponto Plus Power from Oticon Medical.
Page 4
Ponto user to better hear a TV or to communicate through Bluetooth-enabled devices, e.g. cell phones. The Ponto Streamer can also be used as a remote control that enables you to adjust the Ponto Plus sound processor volume and change programs in the Ponto Plus sound processor.
ImporTanT noTIce Please familiarize yourself with the entire contents of this booklet before using your Ponto Streamer. It contains instructions and important information about the use and handling of your Ponto Streamer and batteries.
Using the Ponto Streamer without the neck loop Turning the Ponto Streamer on and off Charging the Ponto Streamer Battery low indicator Remote control of the sound processor Pairing the Ponto Streamer with a cell phone and other devices Clear pairing continues on next page...
Page 7
Primary functions Connectivity/streaming Off/on for surrounding sounds, when streaming sound Cell phone ConnectLine phone solution ConnectLine microphone ConnectLine TV solution Secondary functions Connectivity/streaming Music/audio cable Headset cable Music/audio wireless PC headset – wireless T-coil (built-in) FM receiver (optional)
Page 8
Additional information Avoiding heat, humidity and chemicals Cleaning and maintenance Accessories and spare parts Technical information Index Local offices...
Streamer – what is in the box The Ponto Streamer box consists of the following items: Your Ponto Streamer Neck loop – medium (page 18) Neck loop – long (page 18) Box 1 Box 4 Charger (page 24)
Phone: +46 31 748 61 00 Phone: +45 39 17 71 00 info@oticonmedical.com contact-us@oticon.com Please read this user guide before you start using your Ponto Streamer Ponto – The Bone Anchored Hearing System 3.5 mm mini jack 0000137336000001 stereo cable for...
There is a risk that the battery could explode and cause serious injury. Never expose the Ponto Streamer to extreme heat by putting it in the oven, microwave, burning it, or leaving it inside a parked car in the sun.
Page 14
Warnings choking hazards The Ponto Streamer is not a toy and therefore should be kept out of the reach of children and anyone else who might swallow parts or otherwise cause injury to themselves. Special atten- tion should be paid to the smaller components in order to prevent children from swallowing them and choking.
Page 15
11 kg. Use in cars Using the Ponto Streamer with a cell phone while driving can distract you. If driving condi- tions, or traffic laws, demand it, pull off the road and park before making and answering calls.
Page 16
Oticon, and have been found to fulfil the minimum requirements for ConnectLine compatibility at the time of testing. However, Oticon Medical takes no respon- sibility for such compatibility in general. Specifically, Oticon Medical shall not be responsible for incompatibility resulting from future updates of the cell phones, nor from events of incom- patibility not covered by and/or found in these tests.
Streamer is locked to your own Ponto Plus sound processor only. You should be aware that if your Ponto Streamer is open and you are within a distance of approximately 1 meter of another person’s Ponto Plus sound processor, then this sound pro- cessor can also be operated by your Ponto Streamer.
Wearing the ponto Streamer with the neck loop The neck loop is an integral part of the Ponto Streamer’s electronic system. It is used as an antenna to transmit sound to the sound processor. For the best possible sound and longest possible streaming time, the Ponto Streamer should always be worn with one of the included neck loops.
Page 20
The neck loop snaps into the holes on the top of the Ponto Streamer. Note that when talking to somebody through the Ponto Streamer, it is important that your voice can be picked up by the built-in microphone on the top. Your voice...
Streaming of sound from e.g. TV, or phone calls If the Ponto Streamer is used with the neck loop then it has all functionalities activated no mat- ter whether the Ponto Streamer is open or linked. ImporTanT noTIce A defective neck loop should be replaced immediately.
Page 22
When using the Ponto Streamer without the neck loop, more power will be used – consequently maximum streaming time is reduced to 5 hours on one full charge. Max 1 meter Belt clip (optional) If you use the Ponto Streamer without the neck loop, it should be linked (see page 17) to get access to all Ponto Streamer functions.
The power indicator on the top of the Ponto Streamer should now fade to green. If the Ponto Streamer cannot power on, make sure it is charged (page 24). To see the status of the Ponto Streamer, press the on/off button briefly.
Page 24
Ponto Streamer is off After pressing the on/off button for approx. 2 seconds, all lights will be on for a few seconds to indicate that the Ponto Streamer is now turned on The Ponto Streamer is now turned on and ready for use...
Streamer The Ponto Streamer uses a rechargeable battery. We recommend that you charge the Ponto Streamer once a day for best possible performance. To charge the Ponto Streamer you can either use the enclosed charger or a USB compliant device into a charge current of 500mA.
Page 26
Front Description When turned off and Ponto Streamer is charging, the status indicator will blink green When turned on (or in use) and Ponto Streamer is charging, the status indicator will shift between strong and soft green Blink Fade * Drawing of a charger base...
Battery low indicator Battery low indicator The Ponto Streamer will indicate battery low with a steady red light, then there is approx. 20 minutes capacity left. When the battery is very low (approx. 5 minutes capacity left) the red light will start blinking.
Page 28
Battery low indicator Status Front Description Battery low – approx. 20 minutes capacity left when streaming to sound processor Battery very low – approx. 5 minutes capacity left when streaming to sound processor Steady Fading ImporTanT noTIce The battery should not be drained completely. Keeping the battery fully charged will prolong the capacity of the battery.
Page 29
6 months on a full charge. Battery life expectancy The battery in Ponto Streamer will last for more than 2 years if fully charged once a day. The battery can be replaced by your hearing care professional.
You can mute the Ponto Plus sound processor by pressing the volume up AND down for 1 second simultaneously. ImporTanT noTIce Even if the Ponto Streamer is turned off, the remote functionality of the sound processor will still work.
Streamer with a cell phone and other devices Before the Ponto Streamer can be used with other devices – such as cell phones – the two devices have to be paired. 1. Put the Ponto Streamer in pairing mode Press and hold the on/off button for approx.
Page 34
3. The other device (cell phone) will often request a PIN code. The PIN code for Ponto Streamer is 0 0 0 0 (four zeros). 4. Once paired, the cell phone will typically show a headset icon; at the same time the Ponto Streamer pairing...
clear pairing If you have problems with pairings, you can clear all pairings by pressing the on/off button and the volume up button at the same time for 3 seconds.
Page 36
Status Front Description Ponto Streamer in pairing mode Pairing complete Ponto Streamer on Steady Blinking...
(page 48). 3. Use of a ConnectLine TV solution (sold separately) to wirelessly transmit the TV sound to the sound processor* (page 50). * In effect turning the Ponto Streamer and sound processor into a wireless headset...
When using the Ponto Streamer for streaming sound you can turn surrounding sounds off/on in the sound proces- sor by pressing the volume up AND down simultaneously on the Ponto Streamer for 1 second.
Streamer, make sure that both it and your cell phone have been paired (pages 32-33), are turned on and are within range (10 meters). Your cell phone will often indicate that it is connected to the Ponto Streamer with a small headset icon. For more information please refer to: www.oticonmedical.com/connectline...
Page 41
When your cell phone rings, you will hear an incoming call alert in your sound processor. At the same time the phone button on the Ponto Streamer and the sta- tus indicator will blink green. Press the phone button on the Ponto Streamer briefly to answer the call.
Page 42
Status Front Description Ponto Streamer on and ready Phone indicator and top status blinks green. You will hear an incoming call indicator in your sound processor When the call is connected, you will hear a beep acknowledging that the call is answered – you are now able to...
Page 43
– the call is auto- matically connected to the Ponto Streamer. The phone button on the Ponto Streamer and the status indicator on the top will turn green, and you will hear a confir- mation beep in your sound processor indicating that the call is now connected through the Ponto Streamer and sound pro- cessor.
Page 44
Status Front Description Ponto Streamer on and ready When the call is connected, you will hear a beep acknowledg- ing that the call is connected – you are able to listen and talk to the other party...
Page 45
Reject call – default on An incoming call can be rejected by briefly pressing the volume down button on the Ponto Streamer. Voice dial – default on Briefly pressing the phone button will enable voice dial (if supported by your cell...
Page 46
Pressing and holding the phone button will transfer a call back to the cell phone. All front buttons answer call – default on If off, only the phone button on the Ponto Streamer will answer calls. Enable incoming (A2DP) connections – default off If enabled, other devices, e.g.
The Ponto Streamer can also be used with a traditional analog landline phone by using a ConnectLine phone solution, which is available as a separate accessory. For details on how to use the ConnectLine phone solution, please refer to the instructions included with the ConnectLine phone solution or visit: www.oticonmedical.com/connectline...
Page 48
Talking on the phone Status Front Description Ponto Streamer on and ready Ponto Streamer connected – you are able to listen and talk to the other party Steady...
As a separate accessory, a ConnectLine microphone is availa- ble, which transmits the sound from a chosen speaker to your sound processor through the Ponto Streamer. For details on how to use the ConnectLine microphone solution, please refer to the instructions for use included with the ConnectLine microphone or visit: www.oticonmedical.com/connectline...
Page 50
Sound from connectLine microphone Status Front Description Ponto Streamer on and ready When connected to the microphone – you will hear sound from the microphone in the sound processor Steady Up to 15 meters...
As a separate accessory, a ConnectLine TV solution is available, which transmits the sound from a TV to your sound processor via the Ponto Streamer. For details on how to use the ConnectLine TV solution, please refer to the instructions for use included with the ConnectLine TV solution or visit: www.oticonmedical.com/connectline...
Page 52
Watching TV Status Front Description Ponto Streamer on and ready Connecting to TV Ponto Streamer connected – sound from TV in the sound pro- cessor Steady Blinking...
Secondary functions connectivity/streaming The Ponto Streamer can be used with a wide range of standard peripherals, such as MP3 players, computers etc. The following priorities apply: Priority 1 Mini jack in/out (if connected) Briefly press AUX selector Page 54 Priority 2...
music/audio cable Inserting and connecting the included mini jack cable enables you to listen to music/audio from a wide range of devices. To listen to audio from your device, simply press the selector briefly. When the cable is inserted, streaming will start automatically.
Page 56
Status Front Description Ponto Streamer on and ready You will hear a confirmation beep followed by the sound from the device Steady...
Make sure that you are able to speak into the Ponto Streamer’s microphone. Inserting and connecting the included mini jack cable and splitter cable, enables you to use the Ponto Streamer as a headset with your computer. To use the headset function, simply press the AUX selector briefly.
Page 58
Headset cable Status Front Description Ponto Streamer on and ready You will hear a confirmation beep – you are now able to listen and talk to the other party Steady...
To hear music/sound wirelessly, e.g. from an MP3 player or a computer with built-in Bluetooth, make sure that the device has been paired to the Ponto Streamer (page 32), that both are turned on, and within range (<10 metres). To listen to music from e.g. cell phone, press the AUX button before starting the music player.
Page 60
Status Front Description Ponto Streamer on and ready Ponto Streamer connecting to music/audio device When connected, you will hear a confirmation beep followed by the sound from the device Steady Blink...
pc headset – wireless Make sure that you are able to speak into the Ponto Streamer’s microphone inlet. When pairing to a computer, make sure that the Ponto Streamer is paired as a headset device. To use the headset function, call control is done from the computer.
Page 62
Headset – wireless Status Front Description Ponto Streamer on and ready Ponto Streamer connecting to music/audio device When connected, you will hear a confirmation beep followed by the sound from the device Steady Blink...
T-coil (built-in) Ponto Streamer has a built-in tele loop receiver (T-coil). To receive sound from the tele loop receiver, press and hold the AUX selector for approx. 2 seconds. Please note: if desired, the operation can be changed so the T-coil can be activated by a brief press.
Page 64
T-coil Status Front Description Ponto Streamer on and ready When connected, you will hear a confirmation beep followed by the sound from the tele loop system Steady...
Fm receiver (optional) An FM receiver can be plugged into the Euro pin socket. The receiver is used to receive FM signals from an FM transmitter, typically worn by a school teacher. Simply plug in the FM receiver and briefly press the AUX selector.
Page 66
When connected, you will hear a confirmation beep followed by the sound from the device Steady ImporTanT noTIce Please ensure the Ponto Streamer is turned on, but not streaming sound to the sound pro- cessor, when FM channel sync is required.
The operating temperature for the Ponto Streamer is 10-45 Your Ponto Streamer must never be exposed to extreme heat, such as putting it in the oven, microwave, burning it, or leaving it inside a parked car in the sun. There is a risk that it could explode and cause serious injury.
Ponto Streamer on a regular basis. The microphone inlet and the connec- tors for audio input, the neck loop and charging must be kept free of dirt and debris. The Ponto Streamer and the neck loop must never be washed or immersed in water or other liquids.
accessories and spare parts Skins Additional skins are available from your hearing care profes- sional. Skin – single button A skin with one protruding button, which makes “blind” operation easier, is available from your hearing care professional.
Page 70
Short (51 cm), medium (66 cm) and long (81 cm) from your hearing care professional. Belt clip A belt clip is available from your hearing care professional. charger Base A Charger Base for charging the Ponto Streamer is available from your hearing care professional.
Technical information As well as the Bluetooth transmitter, the Ponto Streamer contains a radio transmitter using short-range magnetic induction technology, working at 3.84 MHz. The magnetic field strength of the inductive transmitter is < -15 dBμA/m @ 10m. The emission power from the Ponto Streamer is below international emission limits for human exposure.
Page 73
operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Page 74
• Consult the dealer or an experienced radio/TV technician for help. Hereby, the legal manufacturer Oticon A/S declares that this Ponto Streamer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Declaration of conformity is available at:...
Index Rechargeable 24 Belt clip 21 Bluetooth 58 A2DP device. See Music wireless Accessories 68 Aircraft, use on 14 Call Answer a call 40 Answer 40 Antenna 18 End 40, 42 Audio (music) 54 Make 42 Cable 54 Reject 44 Listen to music 54 Transfer 45 Wireless 58 Cars, use in 14...
Page 77
Listen to audio 54 Listen to music 54 Neck loop 18 Open/linked Ponto Streamer 17 Maintenance 67 Make a call 42 Microphone 48 Pairing 32 Microphone inlet 11 Clearing 34 Mini jack 11 Mode 32 Mini jack cable 54, 56 PC.
Page 78
Skin 68 Warnings 12, 13, 14 Sound. See music Wireless 58, 60 Spare parts 68 Without the neck loop 20 Splitter 9 Splitter cable 56 Surrounding sounds on/off 37 Talking on the phone 47 T-coil 62 Technical information 71 Tele loop 62 Transfer call 45 TV 50 Voice dial 44...
Page 80
Phone: 1-800-263-8700 info@oticonmedicalusa.com Phone:+44 (0)1698208234 info@oticonmedical.ca info@oticonmedical.co.uk Australia New Zealand South Africa Oticon Medical/Oticon Australia Pty Ltd Oticon Medical/Oticon New Zealand Ltd Oticon Medical Suite 4, Level 4, Building B 142 Lambton Quay Warich Office Close, 11 Talavera Road Wellington 6021...
Need help?
Do you have a question about the ponto streamer and is the answer not in the manual?
Questions and answers