Siemens SCALANCE X308-2M Operating Instructions Manual page 224

Approvals, certificates, standards
9.1 X-300 product group
● Keep to the installation guidelines
● You can always find the latest documentation on the Internet!
● Working on the product
Note
The product was tested with a device that also complies with the standards listed above.
If the product is operated with a device that does not meet these standards, there is no
guarantee that the corresponding values will be adhered to.
Machinery directive
The product is a component in compliance with the EC Machinery Directive 2006/42//EEC.
According to the machinery directive, we are obliged to point out that the product described
is intended solely for installation in a machine.
Before the final product can be put into operation, it must be tested to ensure that it conforms
with the directive 2006/42/EEC.
Note
Note for the manufacturers of machines
This product is not a machine in the sense of the EC Machinery Directive. There is therefore
no declaration of conformity relating to the EC Machinery Directive 2006/42/EEC for this
product.
Note for the manufacturers of machines
This product is not a machine in the sense of the EC Machinery Directive. There is therefore
no declaration of conformity relating to the EC Machinery Directive 89/392/EEC for this
product.
224
The product meets the requirements if you adhere to the installation and safety
instructions contained in this documentation and in the following documentation when
installing and operating the product.
The current descriptions of the currently available products can always be found on the
Internet under the specified entry IDs/Internet pages:
– SIMATIC NET Industrial Twisted Pair and Fiber Optic Networks Manual
8763736 (http://support.automation.siemens.com/WW/view/en/8763736)
– EMC Installation Guideline, Planning Guide
28518276 (http://support.automation.siemens.com/WW/view/en/28518276)
To protect the product from electrostatic discharge, personnel must first discharge any
electrostatic charge from their body before touching the product.
Operating Instructions, 02/2012, A5E01113043-12
SCALANCE X-300