Configuring Basic Network Settings - HIKVISION DS-6400HDI-T User Manual

Configure RS485 Parameters
Steps:
Click Configuration > System Settings > RS485 to enter the following interface:
1.
Configure the RS-485 parameters, including the baud rate, data bit, stop bit and parity type.
2.
Click Save to save the settings.
3.

4.1.4 Configuring Basic Network Settings

Purpose:
You can set the network parameters for the decoder in the parameter configuration interface.
Steps:
Click Configuration > Network > TCP/IP to enter the general network settings interface.
1.
Set the network parameters, including the IP Address, Subnet Mask, Gateway, and DNS Server.
2.
Click Save to save the settings.
3.
Lo-Call 1890 866 900
DS-6400HDI-T Decoder User Manual
Figure 4.14 Configure RS-485 Settings
Figure 4.15 Configure Basic Network Settings
29
www.cctvireland.ie shop@cctvireland.ie