Tire Pressure; Tire Repair; Tire Replacement; Wheels - Cushman HAULER PRO X Owner's Manual

Hide thumbs Also See for HAULER PRO X:
Table of Contents

Advertisement

M
AINTENANCE

Tire Pressure

Maintaining correct tire inflation pressure is essential for safe vehicle operation. You can vary the inflation pressure,
within the recommended range to suit the condition of the terrain.
TIRE PRESSURE RANGE
18 - 22 psi (124 - 152 kPa)

Tire Repair

Tools
• lug wrench, 3/4"
• impact wrench
NOTICE: Tire plug tools and plugs are available at automotive outlets. The tire does not have to be removed
from the wheel to install the tire plug.
Use a tire plug to repair small holes in the tread part of the tire. For large holes or holes/cuts in the tire sidewall, the tire
must be replaced.
1.
Remove the wheel from the vehicle. See Wheel Removal on page 44.
2.
Locate the leak in the tire.
a.
If the tire is very low or flat, fully inflate the tire.
b.
Brush soapy water over the surface of the tire. Air bubbles will be visible where the air is leaking from the
tire.
c.
Mark the hole with chalk.
3.
Install the plug according to the manufacturer's instructions.
4.
Install the wheel on the vehicle. See Wheel Installation on page 45.
5.
Fully inflate the tire. See Tire Pressure on page 12.

Tire Replacement

Tire replacement requires a tire mounting machine and must be done by a qualified tire center or your TSV dealer.

WHEELS

Worn, improperly inflated, improper sized, or incorrectly installed tires will affect vehicle
handling and could cause an accident resulting in severe injury or death.
To decrease the risk of component damage, do not tighten the lug nuts to more than the
torque specified below.
Check lug nuts for tightness at the intervals indicated in the SCHEDULED MAINTENANCE CHART on page 40.

Wheel Removal

Tools
• lug wrench, 3/4"
• impact wrench
1.
Lift the vehicle. See LIFTING THE VEHICLE on page 42.
2.
Remove the lug nuts.
3.
Remove the tire from the vehicle.
44
TERRAIN CONDITIONS
hard surfaces or pavement
soft terrain or turf
• impact socket, 3/4"
• torque wrench, ft.lbs.
• impact socket, 3/4"
• torque wrench, ft.lbs.
RECOMMENDATION
Inflate to higher pressure within the range; never exceed
maximum pressure indicated.
Inflate to lower pressure within the range to reduce
potential damage to the terrain or turf.
Tire style may vary.
Valve Stem Cap

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hauler pro

Table of Contents