Accelerator Pedal; Direction Selector; Seat Bottom; Glove Box / Storage Compartments - Cushman HAULER PRO X Owner's Manual

ACCELERATOR PEDAL

The accelerator pedal is the right pedal on the floorboard. It activates the engine and controls the acceleration of the
vehicle.
Apply slow and steady pressure to the accelerator pedal to increase vehicle speed.

DIRECTION SELECTOR

The direction selector is the key switch. The key switch allows
the operator to select F (forward) or R (reverse).
When you leave the vehicle turn the key switch to OFF, set the
parking brake and remove the key.
NOTICE: The parking brake is automatically set on hydrau-
lic brake vehicles with the IntelliBrake™ system.

SEAT BOTTOM

The bench seat is designed for two occupants.
Lift up on either hip restraint to pivot the seat bottom forward and
access the components underneath. Pivot and lift up on the seat
to completely remove it from the vehicle.

GLOVE BOX / STORAGE COMPARTMENTS

The glove box provides storage space for small items. Glove boxes may be equipped with optional shelf and/or glove
box door.

TRUCK BED

To prevent injury and property damage, follow all warnings, pro-
cedures, and weight capacities described on the label in the
truck bed as well as the ones in this owner's manual. See
HAULING CARGO on page 30 and DUMPING THE TRUCK
BED on page 32.
The tailgate can be opened for loading and unloading cargo.
Open the tailgate latches and lower the tailgate.
Lift the tailgate and secure the latches to close the tailgate.

Manual Bed Release Lever

The truck bed can be tilted by lifting up the release lever on
either side of the vehicle. See DUMPING THE TRUCK BED on
page 32.

Electric Lift

If the vehicle has an electric lift, the switch is located on the cen-
ter dash console. Press and hold the top part of the switch to
raise the truck bed. Press the bottom part of the switch to lower the truck bed.
See DUMPING THE TRUCK BED on page 32.

Flip Seat/Load Deck (If Equipped)

Some vehicles are equipped with a feature that functions as a flip seat or a load deck.
When in the upright position, it is a rear seat for two passengers. The seat flips down to form a load deck.
F
EATURES AND
Direction
Selector
Truck Bed
Release Lever
C
ONTROLS
19