Option Settings - Philips TPM4.1E Service Manual

6.5.2 V-com adjustment
Press Remote control "147852+info" Key, or press
"062596+Info" for TV V-com adjustment, enter the V-com
adjustment mode with a pattern (Green 2) as
shown in Figure 6-2.
R G B R G B
Row 1
Row 2
Row 3
Row 4
Figure 6-2 1920 × 1080 @ 60 Hz, Pixel ON/OFF pattern
Press up/down key of remote control to select V-com in the
OSD. Press the right/left buttons on the remote control to
fine-tune V-com untill minimum or no flicker is detected.
Press the "Store" key to save the aligned VCOM data into NVM.
Note: Make sure you get the optimum result before saving.
This data is saved in the NVM of the IC MAX9668ETP (U7401).
This device can only be rewritten 100 times!
6.6

Option Settings

6.6.1 Reset Options
In SAM, after reset "Reset option code", restart the set
immediately.
6.6.2 Option Code Overview
Table 6-3 Option code overview
CTN_ALT BOM#
32PFL3605/12_1
42PFL3605/12_1
32PFL3605/60_1
42PFL3605/60_1
6.7 Serial Number Definition
Table 6-4 BOM Code
Panel Supplier
AU
CPT
LPL (LG)
QDI
CMO
HSD
SVA
R G B R G B R G B
18850_207_100107.eps
Panel Type Panel ID
LG LC320WUY-SCB1 117
LG LC420WUY-SCB1 116
LG LC320WUY-SCB1 117
LG LC420WUY-SCB1 116
Code
1
2
3
4
5
6
7
Alignments
127 gray
0 gray
100107
TPM4.1E LA 6. EN 19
2010-Jun-18