Heat Sink - HP pavilion x360 Maintenance And Service Manual

7. Remove the heat sink (3) and system board by sliding them up and to the left at an angle.
Reverse this procedure to install the system board.

Heat sink

Description
Heat sink (includes replacement thermal material and 4 captive screws, secured by C-clips)
Before removing the heat sink, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
the following components:
a. Battery (see
b. WLAN module (see
c. Fan (see
d. Audio/USB board (see
e. Speakers (see
f. Display assembly (see
g. System board (see
Remove the heat sink:
Keyboard/top cover on page
Battery on page 31)
WLAN module on page
Fan on page 37)
Audio/USB board on page
Speakers on page 38)
Display assembly on page
System board on page
27), and then remove
34)
36)
40)
47)
Spare part number
768022-001
Heat sink 49