Removal And Replacement Procedures; Computer Feet - HP pavilion x360 Maintenance And Service Manual

5

Removal and replacement procedures

NOTE: This chapter provides removal and replacement procedures for Authorized Service Provider only
components. Components described in this chapter should only be accessed by an authorized service
provider. Accessing these components can damage the computer or void the warranty.
There are as many as 52 screws that must be removed, replaced, and/or loosened when servicing
the computer. Make special note of each screw size and location during removal and replacement.
NOTE: HP continually improves and changes product parts. For complete and current information on
supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then
follow the on-screen instructions.

Computer feet

The computer feet are adhesive-backed rubber pads. There are 2 rubber feet that attach to the bottom cover
in the locations illustrated below. The feet are included in the Rubber Kits, spare part numbers 768019-001
(for use on computers in natural silver finish) and 768018-001 (for use on computers in vibrant red finish).
26 Chapter 5 Removal and replacement procedures