Removing The Sensor Board; Prerequisites; Procedure - Dell Inspiron 13 5000 Service Manual

Removing the sensor board

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the battery.
3 Remove the
4 Follow the procedure from step 1 to step 3 in
panel".

Procedure

CAUTION: Place the display-panel assembly on a soft and clean
surface to avoid scratching the display.
1 Remove the screw that secures the sensor board to the display panel.
2 Peel off the tape and open the latch to disconnect the sensor-board
cable from the sensor board.
computer. After working inside your
base cover.
display assembly.
After working inside your
"Removing the display
97