Removing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Remove the battery.
Peel off the tape that secures the I/O-board cable to the I/O board.
Disconnect the I/O-board cable from the I/O board.
Peel off the tape that secures the power and volume-buttons board-
cable to the palm-rest assembly.
Disconnect the power and volume-buttons board-cable from the I/O
Disconnect the coin-cell battery-cable from the I/O board.
Remove the screws that secure the I/O board to the palm-rest assembly.
computer. After working inside your
After working inside your