Replacing the status-light
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Align and place the status-light board in the slot on the palm-rest
Slide the status-light board-cable into the connector on the keyboard
daughter-board and close the latch to secure the cable.
Adhere the pieces of tape securing the speaker cable to the palm-rest
Replace the battery.
computer. After working inside your
After working inside your