TES E- SD Operator's Manual page 11

MAIN SCREEN:
Press UP / DOWN to move from Main Screen and scroll through Menu
From the Main Screen
PRESS DOWN: TO ACCESS AIR TEMPERATURE SCREEN
PRESS UP: TO CURRENT DATE & TIME SCREEN
Air Temperature Screen: This tells you the current reading of the Air Temperature Sensor
probe if it is connected to the E-TES SD or the default value of 00F if the probe is not
connected.
• Press DOWN to move to Surface Temp Screen
• Press UP to return to Main Screen
Surface Temperature Screen: This tells you the current reading of the Surface Temperature
Sensor probe if it is connected to the E-TES SD or the default value of 00F if the probe is
not connected.
• Press DOWN to move to Moisture 1 Value Screen
• Press UP to return to Air Temperature Screen
© Copyright Tes Drying Systems, 2014
OR
Main screen will display current probe
temperatures or default settings if no probes are
connected.
• Air Default Setting: 00F
• Surface Default Setting: 00F
• Moisture 1 Default Setting: 00%
• Rh (Relative Humidity): Current value
Press SELECT to set Air Temperature Probe
shutdown temperature. Use UP/DOWN to
change Air Temperature shutoff setting.
Press SELECT to set Surface Temperature
Probe shutdown temperature. Use UP/DOWN
to change Surface Temperature shutoff setting.
11