Giant CONTACT SL SWITCH User Manual page 9

4. Assemble the remote control cable to the seatpost and the remote control
unit.
I. Hang the cable stopper on the seatpost.
 Install the remote control cable for external cable:
Upper compressing lever
 Install the remote control cable for internal cable:
Lower
compressing
lever
II. Install barrel and remote control Unit.
Thread the remote control
cable through the hole in the
saddle clamp body. Hang the
remote control cable stopper
on the compressing lever.
Thread the cable through the barrel
until attaching the cable casing tightly.
Thread the cable through the
holes on the remote control unit.
Pull the cable taut and ensure the
seatpost, cable casing, barrel,
and remote control unit attached
correctly.
8
Hang the remote control
cable stopper on the lower
compressing lever.