Table of Contents
Advertisement
Q (Question)
The flash cannot be
activated.
The pictures
recorded with a
flash are dark.
The colours of the
picture recorded
with the flash are
not similar to the
subject in real life.
Cannot play.
Some pictures
cannot be played as
a slide show.
Cannot play music. Is there any effective music file on the card?
[t] Indication is
displayed during
playback or in the
list screen.
Cannot play when
the card is inserted
into other
equipment.
Is the flash set to [Flash off]? Check the flash mode.
(P34)
Is the flash covered with your finger? Is this unit too
far away from the subject?
When you record pictures with the flash, the white
balance may not be properly adjusted even if the
white balance is set in [Manual]. When you use the
flash, we recommend setting the white balance to
[Auto].
When you record pictures with the flash, the white
balance is automatically adjusted according to the
flash light. However, the white balance may not be
properly adjusted when the flash light does not
reach the subject enough.
Is the card inserted?
Is there playable pictures on the card?
Is the mode set to the playback mode?
Pictures recorded with other equipment may not be
displayed as a slide show or may take time to be
displayed.
The data was either recorded in a different format or
damaged. Such data cannot be played.
If [MPEG4] files recorded with this unit are played
on other equipment, the picture quality or the sound
quality may be deteriorated or the files may not be
played.
A (Answer)
97
VQT0Q47
Advertisement
Table of Contents
