Table of Contents
Advertisement
Preparation
Inserting/Removing the Battery or the Card
Be sure to turn this unit off before the following operations.
1
Open the Card/Battery Door at the bottom of this unit.
• Release the lock and then open the Door while sliding it.
2
Insert/remove the battery or the card.
• Read the next page carefully.
3
Close the Card/Battery Door.
• Close the Door and then lock it while sliding.
≥ Never open the Card/Battery Door during the access. (P16)
Otherwise, the data on the card may be damaged.
≥ When the Card/Battery Door cannot be completely closed, remove
the card or battery once and then insert it again.
≥ When you do not use the SD Multi Camera for a long time, remove
the battery.
≥ Do not use the supplied battery for other equipment.
≥ Please be sure to use genuine Panasonic batteries
(CGA-S302E/1B).
12
VQT0Q47
(continued)
Advertisement
Table of Contents
