Panasonic D-Snap SV-AS3 Operating Instructions Manual page 94

Others
Messages
The confirmation/error message will be displayed on the LCD Monitor.
Messages
EMPTY BATTERY
INSERT BATTERY
NO CARD
CHECK CARD
CARD FULL
CARD LOCKED
ACCESSING CARD
NO PICTURE FILE
NO MPEG4 FILE
NO VOICE FILE
NO TRACK
UNPLAYABLE FILE
FILE LOCKED
TARGET FILE DOES
NOT EXIST
OVER LIMIT
94
VQT0Q47
(continued)
The battery remaining is insufficient. Recharge the
battery. (P14)
Insert the battery into this unit correctly. (P12, 13)
This message also appears when the battery is
excessively discharged. Charge the battery.
Insert the card correctly. (P12, 13)
MultiMediaCard is not available.
Re-insert the Memory Card. If [CHECK CARD] is
still displayed, format it. (P22) (If you format a card,
all of the data in the card are deleted.)
Change the card or delete unnecessary data. (P45)
Release the lock of the write-protect switch on the
card.
Processing the data. Please wait for a while.
Insert the card which includes [Picture] files.
Insert the card which includes [MPEG4] files.
Insert the card which includes [Voice] files.
Insert the card which includes [Audio] files.
Cannot play the file which is out of standards.
Record audio files onto the card with SD-Jukebox.
Operate after releasing the protection. (P47)
There is no file which can be played as a slide show
or there is no file which can be set in DPOF setting.
The number of pictures to play in a slide show or
the number of prints set in DPOF setting exceeds
the limit.
Countermeasures