Table of Contents
Advertisement
Others
Q (Question)
The colour or the
brightness of the
LCD Monitor
changes.
The LCD Monitor is
too bright or dark.
Cannot record.
It takes time to
record onto a card.
Recording stops
halfway.
Recorded pictures
appear in mosaic-
like pattern.
The pictures
recorded are too
bright or dark.
A vertical red
spectrum appears
on the LCD Monitor.
96
VQT0Q47
(continued)
The colour or the brightness of the screen may look
different under fluorescent light.
Adjust the brightness of the LCD Monitor properly.
(P21)
Is the card inserted?
You cannot record pictures when the write-protect
switch is slid toward [LOCK].
Is the memory of the card enough?
Delete unnecessary files before recording. (P45)
When you record pictures in [MPEG4] mode, it may
take time to record onto a card depending on the
type of the card. However, this is not a malfunction.
Recording in [Voice] mode may be stopped halfway
depending on the type of the card.
Pictures may appear in mosaic-like pattern
depending on the subject or recording conditions.
The brightness of a picture on the LCD Monitor may
be different from that of a picture actually recorded.
Especially when you record a picture in dark places
with long exposure, the picture looks dark on the
LCD Monitor. However, the picture is recorded
brightly.
This is called "smear". It is specific to CCD, not a
malfunction. It appears when the subject has a
bright part. It is recorded on MPEG4 images, but not
recorded on still pictures.
A (Answer)
Advertisement
Table of Contents
