The flash is not activated
∫
≥
The flash cannot be activated in the following cases.
– When you set the flash to [Auto] or [Reduced red eye] in bright
places
– When recording in [MPEG4] mode
≥
When you record pictures without using the flash, set the ISO
sensitivity to adjust the brightness (P40).
≥
If the subject is too close to the SD Multi Camera when taking a
picture, the exposure may not be set properly and the picture may
appear washed out.
≥
You cannot record pictures even if you press the Shutter button while
the flash mark turns red and blinks (while the flash is charged).
≥
When you let subjects get too close to the flash, the shape or colour
of subjects may be changed because of the heat and light of the
flash.
35
VQT0Q47