Setting Still Pictures To Be Printed And The Number Of Prints (Dpof Print) - Panasonic D-Snap SV-AS3 Operating Instructions Manual

Playback
≥ Error messages also appear in the following cases. Check the
message before connecting.
Messages displayed
USE BOTH AC
ADAPTOR AND
BATTERY
SET TO PLAY MODE
NO CARD
CHECK CARD
TARGET FILE DOES
NOT EXIST
Setting Still Pictures to be Printed and the Number of
Prints (DPOF Print)
DPOF is a system that allows the user to select which pictures are to
be printed on compatible photo printers.
1
Set the mode to [Picture] mode. (P41)
2
Press the [MENU] button and then set the item with the
Jog Ball. (P18)
DPOF
print
56
VQT0Q47
(continued)
When the battery is not inserted
When the AC adaptor is not connected
When the AC adaptor is unplugged during
connection
When connecting in the recording mode
When the card is not inserted
When MultiMediaCard is inserted
When there is no picture to be selected in the
card
l
Conditions
Single print
All prints
Sets the number of print
on DPOF print for each
file.
Sets the same number of
print on DPOF print for all
files.