Correct Upper Needle Seal Installation - Glacial 8LCH-KK-SC-SSF-40 User Manual

CORRECT UPPER NEEDLE SEAL INSTALLATION

NOTE: This seal is not meant to be removed or reinstalled however if seal was removed
for any reason please reinstall correctly. Seal has 4 lugs for securing to the LID.
please insert lugs into corresponding holes and push in to lock.
Lower needle is not of tubular construction and
does not go all the way through. It has U-shaped
configuration with slot on its side.It has sealed
end. Coffee runs out out of the coffee capsule
through the slot in the needle and then into the
inside of the coffee capsule using same slot.
If upper, inlet nozzle get blocked use paper
clip to clean. Needle has 3 openings around
A
the central spike. Check if the silicone seal
on the upper piercing needle is properly
installed.
24