Troubleshooting - Glacial 8LCH-KK-SC-SSF-40 User Manual

It is designed to preserve an original bottled water quality and to eliminate slime build up in the cold water tank, 5 gallon bottle and internal water passageways.
Table of Contents

Advertisement

TROUBLESHOOTING

Attention:
Wet out of the Box:
Your machine was functionally tested using reverse osmosis filtered water, the same as used by 5
gallons water bottlers.
A small quantity of water may be left after testing.
If during car transportation some water had leaked out, it will not affect the workings of the machine.
Please wipe water off of the cooler and let it sit overnight before plugging in.
If you are using this Single Serve Coffee Brewer at the altitude in exc-ess if 2500 feet, you migh
observe water dripping from the coffee dispensing nozzle.
Please follow instructions in the manual for Altitude correction.
Your Brewer works at higher water temperature. At higher elevation it may pre-boil, or boil causing
water spill.
Hot water spills occasionally from the coffee dispensing nozzle.
Reason:
- If machine is located at the altitude higher then 1500 Feet elevation over sea level, water
may become agitated or boil at lower temperature and cause spill over.
Correction:
Follow instructions to make correct settings:
- Immediately after power cord is plugged into the electrical outlet, you will hear an audible signal.
- At the same time , touch buttons "PREHEAT/READY" and "START" for 1 second, to enter into SET
mode. You will see all three (3) cup sizes' LED icons flashing.
- For altitude under 2800 Feet, you should touch button for "Small cup" for 1 second, until "Small
cup" LED will flash. Then touch Start button to SET.
- For altitude under 5000 Feet , you should touch "Middle Cup" button for 1 second, until "Middle
cup" LED will flash. Then touch Start button to SET.
- For altitude under 7000 Feet elevation, you should touch "Big cup" button for 1 second, until "Big
cup" LED will flash, then touch Start button to SET.
Lids are blown off from coffee pods.
Reason:
- Some coffee pods have problems maintaing consistent quality and may fail. Try to use
coffee pods from other production batch.
Correction:
- To remove blow dry function follow procedure described on page 19, called "How to
cancel blow off to dry cups".
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents