Stapling Unit Moving Mechanism; Stapling Position - Konica Minolta Bizhub 501 Service Manual

5. OPERATIONS
5.4.2

Stapling Unit moving mechanism

• The Stapling Unit is moved by the Stapler Movement Motor (M7) [3].
• M7 drives the belt so that the Stapling Unit is moved to the corresponding stapling position.
• The stapling stop position is controlled by the period of time during which the M7 is kept
energized, as counted from the time when the Stapler Home Sensor (PS10) [4] has been
activated.
[4]
[1] Home
[2] Staple change position
[3] Stapler Movement Motor (M7)
5.4.3

Stapling Position

• A single stapling unit is moved to perform 2-point stapling.
[1] Parallel two points
[2] Slant one point
28
[3]
Theory of Operation Ver.1.0 May. 2008
[5]
[3]
[4] Stapler Home Sensor (PS10)
[5] Stapling Unit
[2]
[3] Parallel one point
[1]
[2]
4349t2c019na
[1]
4349t2c020na