Hoover u5491900 Owner's Manual page 5

1.6 1.7
While holding rack Push bolts into
in place, slide handle holes on back of
onto cleaner body. handle.
Make sure tab is
inserted fully into
slot.
STEP II Attach hose
1.11
1.10
A
B
Align end of hose
Press cord into the
with projections (A)
3 notches and the
over slots (B) in dirt
clip as shown.
duct.
STEP III Position tools
1.13
1.14
D
Place smaller un-
ridged end of wand
into bottom of rack.
Snap wand into
E
clip. Repeat with
other wand.
Open tool cover.
Position hose over
rack and into hose
tube (D) or (E)
(depening on your
model).
1.8 1.9
Place nuts in re- Reposition bag
cessed areas on front door by fitting tabs
of handle. Hold each on bottom of door
nut in place while into opening. Press
tightening each bolt top of door to snap
securely with a Phil- securely shut.
lips screw driver.
NOTE: Hose must be connected as shown for all operations.
1.12
B
Slide hose into (B) and twist hose to
lock it into place.
Lift hose tube cover (C).
1.15
1.16
White
Switch
A
Lock
C
ON/OFF
Button
B
Insert ends of
Remove white
dusting brush (A),
switch lock before
crevice tool (B)
operating.
into storage areas.
Secure furniture
nozzle (C) in clip.
Close tool cover.
5
C