Table of Contents
Advertisement
8. Press the new filter into the opening, and simultaneously pull and rock back and forth until
the new wax filter is in place.
Tip: Pressing on the new filter with the flat side of the wax filter tool can give extra
insurance that the filter is correctly in place.
Note: If a different type of wax filter is used for your hearing instruments, or if your hearing instru-
ments do not utilise wax filters, consult your hearing care professional for proper instruction.
temperature test, transport and storage information
GN ReSound Hearing Instruments are subjected to various tests in temperature and damp
heating cycling between -25C (-13F) and +70C (+158F) according to internal and industry stan-
dards. During transport or storage, the temperature should not exceed the limit values of -20C
(-4F) to +60C (+140F) and relative humidity of 90% RH, non-condensing (for limited time). The
air pressure between 500 and 1100 hPa is appropriate.
400038000-GB-12.01-Rev.B.indd 29
29
26-03-2012 09:14:27
Advertisement
Table of Contents
