Speakers - HP chromebook 13 g1 Maintenance And Service Manual

Speakers

Description
Speaker Kit (includes cables)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the two computer feet and base enclosure (see
5. Remove the battery (see
6. Remove the heat sink (see
7. Remove the WLAN module (see
8. Remove the system board (see
Remove the speakers:
1. Disconnect the speaker cables (1).
2. Remove the speakers (2).
Reverse this procedure to install the speakers.
Battery on page 21).
Heat sink on page 21).
WLAN module on page
System board on page
Computer feet and base enclosure on page
23).
25).
Component replacement procedures
Spare part number
859528-001
19).
27