System Board - HP chromebook 13 g1 Maintenance And Service Manual

System board

NOTE: The system board spare part kit includes replacement thermal material.
Description
For use on all computer models:
6th Generation Intel Pentium 4405Y (1.5 GHz/1866/2 MB 15W TDP DC, BGA)
6th Generation Intel Core (M3-6Y30 (0.9 GHz/Turbo up to 2.2 GHz/1866/4 MB 4.5W TDP DC, BGA)
6th Generation Intel Core M5-6Y57 Vpro (1.1 GHz/Turbo up to 2.80 GHz/1866/4 MB 4.5W TDP DC, BGA)
6th Generation Intel Core M5-6Y57 Vpro (1.1 GHz/Turbo up to 2.80 GHz/1866/8 MB 4.5W TDP DC, BGA)
6th Generation Intel Core M7-6Y75 Vpro (1.2 GHz/Turbo up to 3.10 GHz/1866/16 MB 4.5W TDP DC, BGA)
6th Generation Intel Core M7-6Y75 Vpro (1.2 GHz/Turbo up to 3.10 GHz/1866/8 MB 4.5W TDP DC, BGA)
Before removing the system board, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the two computer feet and base enclosure (see
5. Remove the battery (see
6. Remove the heat sink (see
7. Remove the WLAN module (see
Remove the system board:
1. Release the connector (1) to which the SD card reader board cable is attached, and then disconnect
the SD card reader board cable from the system board.
2. Disconnect the TouchPad connector cable (2) from the system board.
3. Release the connector (3) to which the display panel cable is attached, and then disconnect the display
panel cable from the system board.
Battery on page 21).
Heat sink on page 21).
WLAN module on page
Computer feet and base enclosure on page
23).
Component replacement procedures
Spare part number
859523-001
859518-001
859519-001
859520-001
859521-001
859522-001
19).
25