Stihl FSA 85 Instruction Manual page 44

English
Hold the mowing head steady and
N
rotate the cap (1) counterclockwise
until it can be removed.
Remove the mowing head.
N
Pull the spool (2) out of the mowing
N
head (3) and remove the remaining
line.
42
Assembling the mowing head
1
2
3
Fit the empty spool in the mowing
N
head (3).
If the spring (4) has popped out:
Push the spring into the spool (2) as
N
far as stop.
Winding line onto spool
3
4
2
3
3
5
Use green-coded nylon line with a
N
diameter of 2.0 mm.
Cut two 2.5 m lengths of line from
N
the replacement reel (special
accessory).
Rotate the spool (2)
N
counterclockwise until the two arrow
points are in alignment.
Push the straight end of each line
N
through one sleeve (5) in the
mowing head (3) until you feel a
noticeable resistance – and then
continue pushing as far as stop.
FSA 65, FSA 85